The Policy Of Any Correctional Facility - 977 Words

Inmate procedures are governed by the 14th Amendment to the U.S Constitution. Within this amendment it states that a state should not make or enforce any law that goes against the privileges of citizens of the United States. Neither should it deprive any person of life, liberty, or property without due process of law (legal-dictonary.com). The policy of any correctional facility is a written document outlining the specific behaviors that are prohibited to the inmates. It notifies the inmates of the rules and regulations they are responsible to follow. When prisoner are taken into a correctional facility, they must pass through an intake system in order to be classified according to what their assessment infers. Classifications in corrections began in the late 1850’s by a man named Sir Walter Crofton. Back in these days, classification was used for medical reasons. Today, we use it as a means of control, management, and treatment for offenders (Bosworth, 2005). Classification is essential to the operation of an orderly and safe prison. It is there in place for whatever program opportunity exists within the institution. It helps the institution manage proper custody levels of an inmate, identify their educational, vocational, and psychological needs, and separate nonviolent inmates from the violent ones. Classifications in the prison system can be used by the correctional administration to help assign staff, treatment options, and bed space. It can separate probationers whoShow MoreRelated The Importance of Diagnosing and Treating Inmates With Mental Illness 1497 Words   |  6 Pagesand mid 1900’s the U.S went through a period know as deinstitutionalization, where patients in mental facilities were reintroduced into society. This action was sparked by the introduction of antipsychotic drugs and the lack of funding to house and maintain mentally ill patients. This was to help not only the financial restraints of the government but to help each of the patients within the facilities by giving them the ability to live a fulfilling life without confinement. In the last few decades changesRead MoreJuvenile Justice Facilities : Protecting The Health And Wellness Of Our Youngest Inmates1370 Words   |  6 PagesJustice Facilities: Protecting the Health and Wellness of our Youngest Inmates Jennifer Hulvat Kaplan University, J.D. Full Time Faculty March, 2015 The month of April brings a change of seasons around the country, and a new focus issue to the table; Health and Wellness. In the area of Juvenile Corrections, we might take this opportunity to revisit a topic I wrote about in February, â€Å"Incarcerated Youth at Risk: Is Your Facility Doing Enough to Avoid Liability?† Ultimately, a correctional facilityRead MoreLife of a Correctional Officer1056 Words   |  5 PagesLIFE OF A CORRECTIONAL OFFICER CRJ: 303 Corrections 17 March 2013 Abstract The life of a correctional officer is something that is easily over looked. Not understanding or knowing the intricate details that go into what it actually takes to coexist with incarcerated inmates is one of the reasons that the general public is able to go about their daily lives, not thinking or wondering how those inmates are controlled. Correctional officers have one of the hardest jobs on the planet, having to workRead MorePrivatization of American Prisons1661 Words   |  7 Pagesa solution to any problems that the criminal justice system is facing, and government should not delegate coercive authority to private entities. History of Prison Privatization: In the United States of America, prison privatization began to increase in popularity around the late 19th century. There are many reasons that the idea became increasingly entertained. These reasons include the egregious overcrowding of government run facilities, citizens forceful promotion of policies to further increaseRead MoreThe Theories Of Punishment Article1571 Words   |  7 Pagescriminal behavior will be punished,† (Theories of Punishment). Specific deterrence is meant to keep a criminal from committing a crime again. There are two different steps for this; the first is to lock the criminal away to prevent them from committing any more crimes. Secondly, the experience in prison or jail has to be so unpleasant for the criminal that they will never commit a crime again, in fear of returning back to that environment. Another form of punishment is rehabilitation. Rehabilitation givesRead MorePrevalence Of Mental Health Illnesses Essay1585 Words   |  7 PagesPrevalen ce of Mental Health Illnesses in Inmates In this country, individuals with a mental health illness make up half of all correctional facility intakes, which is rivaled with eleven percent of the overall populace, however, only 1 in 9 incarcerated individuals are given any care for their mental illness (Anasseril, 2007). When the much-needed care is absent in prisons and jails, inmates with mental health disorders experience excruciating signs and their disorder can decline and be plaguedRead MoreCorrectional Facilities and Environments1166 Words   |  5 PagesProcesses of Correctional Environments: Correctional facilities play an integral role in the criminal justice system as many individuals who are convicted of offenses are normally placed on probation rather than being sent to prison. In other cases, convicted criminals who have served their jail terms are usually released on parole. In addition to meeting other requirements, criminals are required to stay out of trouble during parole and probation periods. In order to prevent offenders from committingRead MoreThe Effects Of Prison Facilities On The United States Correctional Facilities1518 Words   |  7 PagesCorrectional facilities have been gradually changing over time. The introduction of education is one of the advantages that come from the modern day prisons. Many prisoners are now able to read and earn educational accolades which in prison. Such people as this paper has found out fit better after their jail term in the society. There are thus programs set aside in order to help prisoners gain special skills which h elp them to secure jobs after their sentence. Those who gain these skills in prisonRead MoreEssay about Correctional System1469 Words   |  6 PagesThe U.S. correctional system has come under critical public scrutiny which has corrections administrators scrambling to find ways to run effective correctional facilities. The reality of corrections administration today is that it is changing. Major issues of this changing environment include ongoing budget concerns, privatization, technology, overcrowding, program issues, personnel management, security issues, and legal issues. This paper examines these current issues facing correctional administratorsRead MorePositive And Negative Impacts Of The Correctional System1514 Words   |  7 Pages Then and Now Paper 9/24/2017 Seminar in Corrections 4200 Katlyn Ford Valdosta State University â€Æ' Introduction The correctional system as a whole has a significant impact on the United States. From policy, incarceration, sexual victimization, and those who oversee correctional facilities it all takes a toll on the country. Simply stated, it is the butterfly effect seen in action. When one decision, action, or lack thereof is implemented there will either be positive or negative consequences. Statistics

Family Health Assessment Essay - 1401 Words

Family Health Assessment Karen Youngblood Grand Canyon University February 02, 2012 Family Health Assessment Gordon’s functional health patterns is a method developed by Marjorie Gordon in 1987 proposed functional health patterns as a guide establishing a comprehensive nursing data base(Kriegler amp; Harton, 1992). Gordon’s11 functional health patterns are; health perception/ health management, nutrition, pattern of elimination, activity/ excerise, cognitive, sleep/ rest, self perception/ self concept, roles/ relationships, sexuality, coping/ stress and values/ beliefs. By using these categories it’s possible to create a systematic and standardized approach to data collection and enables the nurse to determine the following†¦show more content†¦This family has a very good perception of health and solid value system. Nutrition aseesment is focused on the patterns of food and fluid consumption relative to metabolic needs (Kriegler amp; Harton, 1992). Nutrition in the Semanovich family is well balanced. This family eats three meals a day with snacks. Fruits and vegetables are eaten in large quantities and limited carbohydrates and sugars. They allow themselves one day a week to eat fast-food. Water consumption and teas are the main fluids consumed in this household. This has not always been the way the Semanovich family ate, their life style changed when Mrs. Semanovich was diagnosed with Diabetics. The Semanovich family has learned the eat healthy to maintain their current health and prevent problems associated with diabetes. Sleep and rest assessment focus is on the individuals sleep, rest and relaxation practices (Kriegler amp; Harton, 1992). Mrs. Semanovich and the kids sleep an average of 8-9 hours a night but Mr. Semanovich works long hours. He wakes up early and gets home late also he is going back to school right now, after coming home from work he does homework. Mr. Semanovich sleeps an average of 4-5 hours a night which causes problems within their family structure. Mrs. Semanovich works full time also and cares for the kids before and after school by herself due to her husband’sShow MoreRelatedFamily Health Assessment : Family Assessment Essay1469 Words   |  6 PagesFamily Health Assessment Family is so important in the society and it is a blessing from God. Healthy behaviors learn from within the family and family member’s stimulus one to each other with health promotion practices. There fore, the health behaviors are very essential in the family assessment and which notifies health-promotion and disease-prevention. Within families, members will be the first one to learn about to promoting health. Families have impact on children’s lifestyle choices. The AmericanRead MoreFamily Health Assessment : Family Assessment1884 Words   |  8 Pages Family Health Assessment The family assessment involves a simultaneous data collection on individual family members or if able the whole family. The nurses and other healthcare professionals interview individuals and family as a whole to understand and assess the health of the family. This interview help professionals detecting the possible origin or factors contributes to the family’s health problems. The Gordon’s functional health pattern will be used as a model to collect and organizeRead MoreFamily Health Assessment1252 Words   |  6 PagesFamily Health Assessment A family health assessment is an important tool in formulating a health care plan for a family. This paper will discuss the nurse’s role in family assessment and how this task is performed. A nurse has an important role in health promotion. To perform these tasks the author has chosen a nuclear family. By the use of family focused open ended questions, 11 functional health patterns were covered. This principle is known as the Gordon’s functional health patterns.Read MoreFamily Health Assessment1375 Words   |  6 PagesFamily Health Assessment Using Gordon’s functional health patterns to assess a family will guide the nurse in developing a comprehensive nursing assessment that is holistic in nature. Gordon’s functional health patterns are founded on 11 principles that are incorporated within the nursing practice. These 11 principles serve as a framework for a thorough nursing assessment in which to build a holistic and individual family care plan (Grand Canyon University, 2011). The author has developed family-focusedRead MoreFamily Health Assessment1150 Words   |  5 Pagesremember the family has an important role in the paradigm of health promotion for the patient. The roles in which the family plays in assisting the patient and providing care are crucial to the health of the patient and the well being of the family as a whole. One tool to assess not only a patient and their views on different aspects of health, but an entire family or even community is Gordon’s Functional Health Patterns. This as sessment tool incorporates eleven topics of health patterns. Health patternsRead MoreFamily Health Assessment1461 Words   |  6 PagesHeritage Assessment: Evaluation of families, cultures and views on health Anniemae Stubbs Grand Canyon University Culture and Cultural Competency in Health Promotion NURS 429 Professor Alma Celaya June 19, 2016 Heritage Assessment: Evaluation of families , cultures and views on health Cultural Heritage is a concept that is passed on from one generation to the next that depicts how people live, act, behave, or think. It can be a noticeable or vague manifestation. It includes various customsRead MoreFamily Health Assessment1085 Words   |  5 PagesFAMILY HEALTH ASSESSMENT This assessment was conducted after interviewing the Nelson family using Gordon’s functional health pattern. Marjorie Gordon developed a method to be used by nurses in the nursing process to provide a comprehensive nursing assessment. It includes eleven principles for the collection of data and helps the nurse identify two or more wellness nursing diagnoses. It is a systematic and standardized approach to data collection (â€Å"functional health† n.d.)Read MoreHealth Assessment Of Families And Their Health1399 Words   |  6 PagesHealth is directly related to the activities in which we participate in, the food we eat, and the substances to which we are exposed to daily. Where we live and work, our gender, age, and genetic makeup also impact our health. (Nies, 2011) Assessments of family’s health are to help focus on the control and prevention of diseases. Health assessment assist in determining an individual’s perception of their quality of life along with the family’s perception as a whole. This also helps to define a person’sRead MoreFamily Health Assessment1465 Words   |  6 PagesFamily Health Assessment Family health and wellness can be influenced by many factors such as society, culture, religion, and family members. Somehow, society, culture, religion and families are connected to each other. To understand an individual, it’s important to understand the family system of an individual. Health practices, whether effective or ineffective, are activities performed by individuals or families as a whole to promote health and prevent disease (Edelman, 2010). A family healthRead MoreFamily Health Assessment1537 Words   |  7 PagesFamily Health Assessment Melody Moore Grand Canyon University NRS-429V Instructor: Renita Holmes May 10th 2013 Family Health Assessment A comprehensive family assessment provides a foundation to promote family health (Edelmanamp;Mandle, 2011).Gordon’s functional health patterns is a method developed by Marjorie Gordon in 1987 in which she proposed functional health patterns as a guide to establishing a comprehensive data base.(Kriegleramp;Harton,1992).Gordon’s eleven functional health

Similarities And Differences Between PMBOK And PRINCE2 Methodology

Question: Discuss about the Similarities And Differences Between PMBOK And PRINCE2 Methodology. Answer: Project methodology: Project methodology in aproject management refers to the guiding process, which is used by the persons involved in the project. Project methodology can also be defined as the five different phases of project management and they are define, plan, launch, manage and closure (Kerzner Kerzner, 2017). Project methodology is used for the purpose of improving the quality of the project by means of better management process. Project methodology consists of guidelines, templets and definitions regarding various types of activities that are essential for making successful completion of projects (pundak, 2014). The project methodologies are associated with providing a certain set of standards which in turn provides some tools and processes for the project manager so as to make his/her job easy. A common ground is provided by the project methodology for all type of projects. Similarities and differences between PMBOK and PRINCE2 methodology: Difference between PMBOK and PRINE2: The common differences between PMBOK and PRINCE2 are listed below: PRINCE2 is a method which is perspective in the outputs of theproject management and this might include the configuration records, logs, reports and the documents of baseline (Snyder, 2014). Whereas in PMBOK method it is associated with the providing of proper guidelines on the tools which might include the three point estimates, techniques of gathering the information, matrices of the stakeholders and earned value analysis. There is a need of emphasizing to review the business case of particular project in the PRINCE2 method (Matos Lopes, 2013). The project manager loses control over the project once the project is started in the PMBOK method. Similarities between the PMBOK and PRINCE2 method: Along with the differences there are several differences that exists between the PMBOK and PRINCE2 some of them are listed below: Some set pf techniques are provided by both of this methodologies along with the templets and the tools needed for the purpose of managing the projects and to avoid the requirements which re are needed for re-invention (Rose, 2013). PMBOK as well as PRINCE2 methods are aimed at handling of the common projects characteristics. This two methods are associated with the acceleration of changes, unique inputs and the new deliverables as well (Karaman Kurt, 2015). Along with this both of this also puts limits on the budgets, the resources and also delimitates the timescale. All the risks which are inherited from the projects like the overspending of money, delivery of unsatisfactory outputs and slippage of the schedule and many more are reduces by both of this methods (Ghosh et al.,2012). PRINCE2 in Project Life Cycle (PLC) The PRINCE2 methodology acts as a very important factor for success of Project Life Cycle. The planning of the project life cycle can be defined by making use of three main part of the PRINCE2 methodology and they are listed below: Firstly, Manage by Steps which is the main step of the PRINCE2 methodology. PRINCE2 methodology is associated with providing a high level planning which is done before beginning the project and this includes the division of project into various phases or parts which is followed by making of a detailed plan for the project (Turner, 2016). This acts as a very important factor due to the fact that whatever the activities that are carried out in project is never predictable. Along with this while preparing a project it is never possible to predict the possible outcome. So a detailed planning can help a lot in the whole lifecycle of a project. Secondly, Planning which is another main step of the PRINCE2 methodology. This is associated with the detailed explanation of the characteristics as well as the type of plan that is to the carried out by the PRINCE2 method. The projects that are carried out with the help of PRINCE2 methodology consists of high level planning which is made before beginning of the project (Lianying, Jing Xinxing, 2012). There exists some stage plans in the PRICE2 methodology which are generally prepared for the purpose of managing the stages before initiating the project. The team plans is considered to be optional and are implemented when needed and this plan is also prepared at the starting of the project. Thirdly, the tree processes are carried out in PRINCE2 method for initiating the project along with managing the boundary of the various stages. References: Ghosh, S., Forrest, D., DiNetta, T., Wolfe, B., Lambert, D. C. (2012). Enhance PMBOK by comparing it with P2M, ICB, PRINCE2, APM and Scrum project management standards.PM World Today,14(1), 1-77. Karaman, E., Kurt, M. (2015). Comparison of project management methodologies: prince 2 versus PMBOK for it projects.Int. Journal of Applied Sciences and Engineering Research,4(5), 657-664. Kerzner, H., Kerzner, H. R. (2017).Project management: a systems approach to planning, scheduling, and controlling. John Wiley Sons. Lianying, Z., Jing, H., Xinxing, Z. (2012). The project management maturity model and application based on PRINCE2.Procedia Engineering,29, 3691-3697. Matos, S., Lopes, E. (2013). Prince2 or PMBOKa question of choice.Procedia Technology,9, 787-794. Rose, K. H. (2013). A Guide to the Project Management Body of Knowledge (PMBOK Guide)Fifth Edition.Project management journal,44(3). Snyder, C. S. (2014). A guide to the project management body of knowledge: PMBOK () guide.Project Management Institute: Newtown Square, PA, USA. pundak, M. (2014). Mixed agile/traditional project management methodologyreality or illusion?.Procedia-Social and Behavioral Sciences,119, 939-948. Turner, R. (2016).Gower handbook of project management. Routledge.

Wrote The Signalman Essay Example For Students

Wrote The Signalman Essay Dickens leaves the reader wondering if the Convict is religious or not because when he lets Pip go he makes pip say Lord strike me dead if I dont, which either means the Convict believes in a Lord or the convict believes that Pip might believe in a Lord so it would give Pip a better reason for coming back, if the fact a young man willing to tear out his heart and liver isnt enough. When the Convict lets pip go home Pip runs away towards his home. He is obviously scared and occasionally looks back to see if the Convict is still there. We will write a custom essay on Wrote The Signalman specifically for you for only $16.38 $13.9/page Order now The end of chapter one explains how Pip sees in the distance ac, which makes him think of the horrible young man. He looks around for the young man and then becomes frightened again and so runs all the way home without stopping. This technique at the end of the chapter is called a cliffhanger and it makes the reader want to read on leaving them in Suspense in what is going to happen next. Dickens also wrote The Signalman and I will briefly explain the first few paragraphs how Dickens creates Suspense In the Signalman: The Signalman has a very unusual beginning Halloa! Below there! Dickens creates suspense in the first few paragraphs of the signalman by once again luring the reader into an unknown atmosphere. He start off the story with someone shouting down at a signalman and this is the first piece of Suspense. The reader is left wondering what will happen next or what the signalman will say. The man shouting down is asking the signalman if there is any way, which he can come down and talk to him. The next large area of Suspense is when Dickens describes a train passing by Just then, there came a vague vibration in the earth and air, quickly changing into a violent pulsation, and an oncoming rush which caused me to startle back, as though it had force to draw me down. When such vapour rose to my height from this rapid train , had passed me and was skimming away over the landscape. Dickens builds up suspense by describing the train passing in so much detail and leaving us to wonder and imagine what will happen next. Dickens is very good at using imagery in his character and having a visual image of a character helps that person to understand the story more. The way in which Dickens explains the surroundings and the characters is in so much detail we can almost picture them as if they were in the room with us. In the Signalman Dickens describes the descent in which the person has to make to travel down to the signalman. It is so detailed you can picture being there. Dickens also uses the senses to enhance the feeling of what he is describing. His favourite sense is sight as most of the things he describes are to do with seeing the object he is describing. There by a dint of looking closely about me, I found a rough descending zig-zag path notched out: which I followed. The cutting was extremely deep, and unusually precipitate. It was made through a clammy stone that became oozier and wetter as I went down. Dickens also uses complex words to portray his suspense For these reasons, I found the way long enough to give me time to recall a singular air of reluctance or compulsion with which he had pointed out the path. Dickens describes the thoughts and images that the man sees when he comes down to talk with the signalman. .ubf955b12f0d12c996fcf2ca9909c6536 , .ubf955b12f0d12c996fcf2ca9909c6536 .postImageUrl , .ubf955b12f0d12c996fcf2ca9909c6536 .centered-text-area { min-height: 80px; position: relative; } .ubf955b12f0d12c996fcf2ca9909c6536 , .ubf955b12f0d12c996fcf2ca9909c6536:hover , .ubf955b12f0d12c996fcf2ca9909c6536:visited , .ubf955b12f0d12c996fcf2ca9909c6536:active { border:0!important; } .ubf955b12f0d12c996fcf2ca9909c6536 .clearfix:after { content: ""; display: table; clear: both; } .ubf955b12f0d12c996fcf2ca9909c6536 { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .ubf955b12f0d12c996fcf2ca9909c6536:active , .ubf955b12f0d12c996fcf2ca9909c6536:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .ubf955b12f0d12c996fcf2ca9909c6536 .centered-text-area { width: 100%; position: relative ; } .ubf955b12f0d12c996fcf2ca9909c6536 .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .ubf955b12f0d12c996fcf2ca9909c6536 .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .ubf955b12f0d12c996fcf2ca9909c6536 .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .ubf955b12f0d12c996fcf2ca9909c6536:hover .ctaButton { background-color: #34495E!important; } .ubf955b12f0d12c996fcf2ca9909c6536 .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .ubf955b12f0d12c996fcf2ca9909c6536 .ubf955b12f0d12c996fcf2ca9909c6536-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .ubf955b12f0d12c996fcf2ca9909c6536:after { content: ""; display: block; clear: both; } READ: The Wizard of Oz Essay I resumed my downward way, and, stepping out on the level of the railroad and drawing nearer to him, saw that he was a dark sallow man , with a dark beard and rather heavy eyebrows. His post was in a as solitary and dismal place as ever I saw. On either side, a dripping-wet wall of jagged stone, excluding all view but a strip of sky; the perspective one way, only a crooked prolongation of this great dungeon; the shorter perspective in the other direction , terminating in a gloomy red light, and the gloomier entrance to a black tunnel, in whose massive architecture there was a Barbarous, depressing, and forbidding air. This section is a perfect example of how Dickens creates suspense in the Signalman and great Expectations. He uses great detail to lure a reader into an unknown atmosphere. This makes the reader want to read on and desperate to find out what is going to happen next. A combination of interesting and thorough detail, careful choices of words and the five senses create an excellent base for building up Suspense in Dickens Stories. This is why he is such a brilliant Suspense writer.

Cuban Bay essays

Cuban Bay essays 1961, an unsuccessful invasion of Cuba by Cuban exiles, supported by the U.S. government On Apr. 17, 1961, an armed force of about 1,500 Cuban exiles landed in the Bahà ­a de Cochinos (Bay of Pigs) on the south coast of Cuba Central Intelligence Agency (CIA) with the approval of the Eisenhower administration, and supplied with arms by the U.S. government, the rebels intended to foment an insurrection in Cuba and overthrow the Communist regime of Fidel Castro The Cuban army easily defeated the rebels, most were either killed or captured The invasion provoked anti-U.S. demonstrations in Latin America and Europe and further embittered U.S.-Cuban relations Poorly planned and executed, the invasion subjected President Kennedy to severe criticism at home. Cuban exile leader Jos Mir Cardona, president of the U.S.-based National Revolutionary Council, blamed the failure on the CIA and the refusal of Kennedy to authorize air support for the invasion In Dec., 1962, Castro released 1,113 captured rebels in exchange for $53 million in food and medicine raised by private donations in the United States. When rebel forces under the command of Fidel Castro completed the overthrow of Cuban dictator Fulgencio Batista on New Year's Day, 1959, the future of U.S.-Cuban relations became uncertain, at best. As the year progressed, Castro solidified control over the revolutionary government and initiated an ambitious program of reforms, replacing American companies' control of key industries with economic measures focused on national development The CIA set about the task zealously, eager to attempt a rerun of their successful 1954 operation to overthrow Guatemala's leftist leader, President Jacobo Arbenz. Much of the Agency's planning for the Cuba program was modeled on the Guatemala campaign, which was conducted to appear as an independ...

The Goliad Massacre of the Texas Revolution

The Goliad Massacre of the Texas Revolution In the wake of the Texan defeat at the Battle of the Alamo on March 6, 1836, General Sam Houston ordered Colonel James Fannin to abandon his post at Goliad and march his command to Victoria. Moving slowly, Fannin did not depart until March 19. This delay allowed the lead elements of General Josà © de Urreas command to arrive in the area. A mixed force of cavalry and infantry, this unit numbered around 340 men. Moving to attack, it engaged Fannins 300-man column on an open prairie near Coleto Creek and prevented the Texans from reaching the safety of a nearby timber grove. Forming a square with artillery at the corners, Fannins men repulsed three Mexican assaults on March 19. During the night, Urreas force swelled to around 1,000 men and his artillery arrived on the field. Though the Texans worked to fortify their position during the night, Fannin and his officers doubted their ability to sustain another day of fighting. The next morning, after Mexican artillery opened fire on their position, the Texans approached Urrea regarding negotiating a surrender. In meeting with the Mexican leader, Fannin asked that his men be treated as prisoners of war according to the usages of civilized nations and paroled to the United States. Unable to grant these terms due to directives from the Mexican Congress and General Antonio Lopez de Santa Anna and unwilling to mount a costly assault against Fannins position, he instead asked that the Texans become prisoners of war at the disposal of the Supreme Mexican Government. To support this request, Urrea stated that he was unaware of any instance where a prisoner of war who had trusted the Mexican government had lost their life. He also offered to contact Santa Anna for permission to accept the terms requested by Fannin. Confident that he would receive approval, Urrea told Fannin that he expected to receive a response within eight days. With his command surrounded, Fannin agreed to Urreas offer. Surrendering, the Texans were marched back to Goliad and housed at Presidio La Bahà ­a. Over the next few days, Fannins men were joined by other Texan prisoners that had been captured after the Battle of Refugio. In accord with his agreement with Fannin, Urrea wrote to Santa Anna and informed him of the surrender and recommended clemency for the prisoners. He failed to mention the terms sought by Fannin. Mexican POW Policy In late 1835, as he prepared to move north to subdue the rebelling Texans, Santa Anna grew concerned about the possibility of their receiving support from sources within the United States. In an effort to deter American citizens from taking up arms in Texas, he asked the Mexican Congress to take action. Responding, it passed a resolution on December 30 which stated, Foreigners landing on the coast of the Republic or invading its territory by land, armed, and with the intent of attacking our country, will be deemed pirates and dealt with as such, being citizens of no nation presently at war with the Republic and fighting under no recognized flag. As the punishment for piracy was immediate execution, this resolution effectively directed the Mexican Army to take no prisoners. Complying with this directive, Santa Annas main army took no prisoners as it moved north to San Antonio. Marching north from Matamoros, Urrea, who lacked his superiors thirst for blood, preferred to take a more lenient approach with his prisoners. After capturing Texans at San Patricio and Agua Dulce in February and early March, he sidestepped execution orders from Santa Anna and sent them back to Matamoros. On March 15, Urrea again compromised when he ordered Captain Amos King and fourteen of his men to be shot after the Battle of Refugio, but allowed colonists and native Mexicans to go free. Marching to Their Death On March 23, Santa Anna replied to Urreas letter regarding Fannin and the other captured Texans. In this communication, he directly ordered Urrea to execute the prisoners which he dubbed perfidious foreigners. This order was repeated in a letter on March 24. Concerned about Urreas willingness to comply, Santa Anna also dispatched a note to Colonel Josà © Nicols de la Portilla, commanding at Goliad, ordering him to shoot the prisoners. Received on March 26, it was followed two hours later by a conflicting letter from Urrea telling him to treat the prisoners with consideration and to use them to rebuild the town. Though a noble gesture by Urrea, the general was aware that Portilla lacked sufficient men to guard the Texans during such an endeavor. Weighing both orders during the night, Portilla concluded that he was required to act on Santa Annas directive. As a result, he ordered that the prisoners be formed into three groups the following morning. Escorted by Mexican troops led by Captain Pedro Balderas, Captain Antonio Ramà ­rez, and Agustà ­n Alcà ©rrica, the Texans, still believing they were to be paroled, were marched to locations on the Bexar, Victoria, and San Patricio Roads. At each location, the prisoners were halted and then shot by their escorts. The overwhelming majority were killed instantly, while many of the survivors were chased down and executed. Those Texans who were too wounded to march out with their comrades were executed at the Presidio under the direction of Captain Carolino Huerta. The last to be killed was Fannin who was shot in the Presidio courtyard. Aftermath Of the prisoners at Goliad, 342 were killed while 28 successfully escaped the firing squads. An additional 20 were saved for use as doctors, interpreters, and orderlies through the intercession of Francita Alvarez (The Angel of Goliad). Following the executions, the bodies of the prisoners were burned and left to the elements. In June 1836, the remains were buried with military honors by forces led by General Thomas J. Rusk which advanced through the area after the Texan victory at San Jacinto. Though the executions at Goliad were carried out in accordance with Mexican law, the massacre had a dramatic influence abroad. Whereas Santa Anna and the Mexicans had previously been seen as cunning and dangerous, the Goliad Massacre and the Fall of the Alamo led them to be branded as cruel and inhuman. As a result, support for the Texans was greatly bolstered in the United States as well as overseas in Britain and France. Driving north and east, Santa Anna was defeated and captured at San Jacinto in April 1836 paving the way for Texas independence. Though peace existed for nearly a decade, conflict came to the region again in 1846 following the annexation of Texas by the United States. In May of that year, the Mexican-American War began and saw Brigadier General Zachary Taylor win quick victories at Palo Alto and Resaca de la Palma. Selected Sources Texas State Historical Association: Goliad MassacreFannins Fight the Massacre at La BahiaTexas State Library Archives Commission: Goliad Massacre

Qualitative Data Analysis Tools Assignment Example | Topics and Well Written Essays - 250 words

Qualitative Data Analysis Tools - Assignment Example It has found wide use in various fields of research, including medicine and epidemiology. The software has a friendly user-interface that enables non-advanced users to easily conduct various statistical tests. Apart from common statistical analyses such as exploratory data analysis, comparison of means, regression, and time series analyses, among others, STATA has special commands to analyze data arising from epidemiological studies (Cox, 2006; Da Silva et al, 2007). Measures such as incidence rate ratios, odds ratios, and matched case-control odds ratios that are critical to investigating differences in the two groups enrolled in the study can easily be conducted (Szklo, 2007; Miller, 2007). Apart from the user friendly drop-down menus, users can also define their own commands for specific analyses and research conditions. For instance, while the default confidence interval is 0.95, advanced users can define special commands to enable them use, for instance, a 0.99 confidence interv al. The customizable menus also easily allow users to focus the analysis to specific study

A literary analysis of two poems by Donne namely The Flea and The Sun Essay

A literary analysis of two poems by Donne namely The Flea and The Sun Rising - Essay Example Donne is acknowledged as a love poet, but this poem deals with love in an incongruous way given the fact that the speaker does not attach any importance to some preexisting relationship or chemistry with the woman he is attracted to. Instead he uses â€Å"the flea’s activity as an excuse for conjugal relations† (Brackett 179). He does not care to invest time in building a foundation before he approaches his love. All the romantic suspense in one’s exploration of the other person leading to bigger events is omitted and emphasis is laid on the speaker’s sexual desires. Donne’s take on love in this poem marked by complexity of thought and strange imagery leaves the readers amused and impressed even though it is playful and absurd. The speaker in the poem never considers the woman’s objections and simply reacts to them making her come across as a fool in denial. Then more dirt is splashed on the woman in the concluding lines of second stanza wher e he writes, â€Å"Let not to this, selfe murder added bee / And sacrilege, three sinnes in killing three† (17-18) and is seen equating killing the flea to sins like suicide, murder, and sacrilege. The approach to love, if there is any, is first quite imaginative given how the speaker uses a simple flea to lay out an entire framework. Then, this approach takes on a deep irrational hue. Finally, all passion is forgotten when Donne uses imagery of the flea’s blood and writes, â€Å"Cruel and sodaine, hast thou since / Purpled thy nail in blood of innocence† (19-20).... The approach to love, if there is any, is first quite imaginative given how the speaker uses a simple flea to lay out an entire framework. Then, this approach takes on a deep irrational hue. Finally, all passion is forgotten when Donne uses imagery of the flea’s blood and writes, â€Å"Cruel and sodaine, hast thou since / Purpled thy nail in blood of innocence† (19-20). Here, he is seen handling resentment stemming from thwarted desires. It is style like this which makes one appreciate how Donne, as chief of the metaphysical poets, is mesmerizingly capable of handling love in all its aspects even when dissatisfied desires leave behind deep wounds of bitterness as in case of the poem under consideration. The speaker’s argument is laden with sexual innuendos. Even the movement within the poem mirrors the act of lovemaking considering the argument which is contemplative in first stanza, then picks momentum reaching climax in second stanza, and finally culminates wit h the sudden unexpected death of the flea. In contrast to other poems like â€Å"The Sun Rising† in which the poet appears hopelessly in love, this poem is more concerned with lustful desires yearning to be fulfilled. According to the argument in this poem, the act of sex is nothing more than mingling of fluids and a history of romance is not necessary. But when the word â€Å"little† (2) is used by the poet, it is not meant that he does not consider the act of lovemaking important. Rather, it is only a way of convincing his love that engaging in sex would not really be a gigantic sin (Brackett 179). In the Renaissance period, the concept of sex was really confined to mixing of the blood which according to the poet has already happened when he writes, â€Å"And in this flea our two bloods mingled bee;†

Banana Sushi Outline Essay Example for Free

Banana Sushi Outline Essay How many of you have ever tried or eaten a peanut butter and banana sandwich? For those who have banana sushi is exactly that but much more fun and exciting to do at home. Transition: let’s start by getting ingredients BODY: I. The first step is to get all of the ingredients. A. There are certain ingredients needed to make banana sushi; the first step is to gather them. 1. You will need the peanut butter of your choice (smooth works better) 2. You will need two pieces of bread 3. And you will need a fresh banana Transition: now that we have the ingredients we can get the materials B. There are also certain materials necessary to make banana sushi; the second step is to gather those. 1. You will need a butter knife 2. You will need a rolling pin 3. And you will need some type of cutting board. Transition: Now that we have both the ingredients and the materials to make banana sushi we can start making it! C. Now you can start making it. 1. The first step is to cut all the crust off of the bread and dispose of it, then to lay the edges of the bread on top of each other and flatten it together with the rolling pin. 2. The second step is to then take the butter knife and spread the peanut butter over the bread. . The third step is to take your banana, peel it and cut it into coin size pieces and lay them neatly on the bread covered with peanut butter. 4. The final step is to roll the bread and then cut it into sections   The three steps in making banana sushi: A. The first step is gathering the ingredients B. The second step is gathering the materials C. The third step is making it. II. Now that I’ve shown you guys a fun new way to eat a peanut butter and banana sandwich otherwise known as banana sushi, I hope you will try it at least once in your life because it’s always nice to try something new.

Catalytic Converters :: essays research papers fc

Catalytic Converters   Ã‚  Ã‚  Ã‚  Ã‚  Notice when a vehicle drives by nowadays, that it is so much quieter than those loud oldies that pour out the blue smoke. Ever wonder just what is underneath a vehicle that makes the new ones so much cleaner. It is called a catalytic converter. The main function of a catalytic converter is to decrease pollution emitted from a vehicles exhaust. The concept behind this is to add a catalyst and force a reaction between the automobile's exhaust and oxygen in the converter. To see just how this happens let's look inside of a catalytic converter.   Ã‚  Ã‚  Ã‚  Ã‚  A catalytic converter is made up mainly of a mufflerlike chamber which contains porous, heat-resistant materials coated with either platinum or palladium. These materials are known as catalysts. A catalyst is an element which although causing a reaction to occur, does not change at all during the reaction. This is the idea behind a catalytic converter. The carbon monoxide gas and hydrocarbons emitted from the engine will travel along the exhaust system until they reach they catalytic converter. There it comes into contact with the described catalyst. This forces a reaction between the carbon monoxide and hydrocarbons with the oxygen inside the converter creating products of carbon dioxide and water vapor. The reaction which occurs inside the converter is as follows:   Ã‚  Ã‚  Ã‚  Ã‚  The main compounds involved are carbon monoxide and hydrocarbons (compounds of hydrogen and carbon), as well as oxygen. When these three are combined with the provided catalyst, a reaction occurs as above. During the reaction the oxygen splits apart the carbon monoxide and the hydrocarbons and allows them to combine with its elements forming the aforementioned products.   Ã‚  Ã‚  Ã‚  Ã‚  The catalytic converter first made an appearance in vehicles in 1975. The government of the United States of America had established a law controlling auto emissions. There was one minor detail that was outlined in the use of a catalytic converter, however. There must only be the use of lead-free gasoline. The reasoning behind this was that if a leaded gasoline was used the lead would cover the platinum and palladium pellets rendering them ineffective and thereby ceasing the reaction to exist. Phosphorus had much of the same effect on the pellets so the gasoline must contain minimal amounts of it as well.   Ã‚  Ã‚  Ã‚  Ã‚  A catalytic converter can be located in every new vehicle today, unless the vehicle runs on diesel fuel. In case you were interested in finding the catalytic converter nearest you, you may want to take a look under the nearest vehicle. It looks like the muffler only it is a little bit larger and more to

Bigotry in Sitcoms: All in the Family

The impact of media communication on society is interpreted by its audiences based on numerous factors. All in the Family was one of the first sitcoms that displayed bigotry in an open forum. Audiences interpreted the show based on their specific in terms of either dominant or oppositional. Audience's interpretations were based on their individual views or beliefs. Writing Intended to have the reader perceive a specific Idea or thought Is known as preferred reading.Producers and writers Intend for their audiences to interpret their material In a specific way. If their perception is different than the intended view this is known as oppositional reading or decoding. Oppositional Readings Dominant and The character of Archie Bunker is represented as a conservative, super patriotic, working class American who is a bigot. Both a dominant and oppositional view Is perceived depending upon the viewing audience. It was the Intent of producers and writers to bring bigotry out In the open where people would laugh rather than take offense.Archie was considered a bigot who was admired for his candid style by some while others were able to accept it as amorous. â€Å"Some viewers applaud Archie for his racist viewpoint, while others applaud the show for making fun of Bigotry' (Vulgar and Reach). The article, â€Å"Archly Bunker's Bigotry: A Study In Selective Perception and Exposure reveals an oppositional reading In which viewers perceive Mike as the opposition. Mike provides rebuttals to Archive's derogatory slurs and racist remarks. The show gives the viewer a character they can relate to based on their selective perception. Avider and Reach). Archie Bunker's Attitude Archie shows he is definitely without a bout racist through his verbal comments and physical expressions In the video clip, â€Å"Hollywood Knows the Truth Opt. 1: Archly Bunker In All in the Family. † Archie classifies specific races, genders and ethnic backgrounds Into categories. Some of his verb al remarks included colored as â€Å"Jews† and polish people, Mike, as â€Å"anathemas†. Archive's expressions during the toasting scene displayed different reactions when Barney drank out of his glass versus his reaction to Sammy Davis Jar. Ringing out of the same glass. Archie didn't want to drink after a colored man. Archie asks Sammy if he thinks he Is prejudice. Sammy responds sarcastically, muff can tell the difference between black and white† (â€Å"Hollywood Knows the Truth Opt. 1: Archly Bunker In All In the Family†). Finally, when Sammy gets ready to leave, he asks Archive's friend to take a picture of him and Archie. As the man snaps the picture, Sammy kisses Archie on the cheek. Archive's expression said it all! Throughout the video clip Archie tries to prove to himself and everyone else he is not racist.No matter how much he tried to play it if, everyone was aware of his feeling on racism through his verbal comments and physical expressions. S elective Perception and Exposure unaware selective perception Ana exposure, unprejudiced viewers perceive Archie as a dumb bigoted â€Å"hardhat. † The prejudice viewer perceives Mike as a long haired, lazy â€Å"anathema Pollock. † In selective perception prejudice viewers are more apt to enjoy the show for its satire while high prejudice viewers enjoy the humor. Therefore, the show is viewed equally with allowing for opposite perceptions.

Aims Of Guidance And Counselling Essay

The aims of the guidance and counselling service are similar to the purposes of education in general—to assist the student in fulfilling her basic physiological needs, understanding herself and acceptance of others, developing associations with peers, balancing between permissiveness and controls in the educational setting, realizing successful achievement, and providing opportunities to gain independence. The purposes of guidance and counselling provide emphasis and strength to the educational program. Some specific aims of the school guidance and counselling program include the following (Gibson, 2009): To Provide for the Realization of Student Potentialities To all students, the school offers a wide choice of courses and co-curricular activities. A significant function of education is to help students identify and develop their potentialities. The counsellor’s role is to assist students to distribute their energies into the many learning opportunities available to them. Every student needs help in planning his major course of study and pattern of co-curricular activities. To Help Children with Developing Problems Even those students who have chosen an appropriate educational program for themselves may have problems that require help. A teacher may need to spend from one-fifth to one-third of his time with a few pupils who require a great deal of help, which deprives the rest of the class from the teacher’s full attention to their needs. The counsellor, by helping these youngsters to resolve their difficulties, frees the classroom teacher to use his time more efficiently. To Contribute to the Development of the School’s Curriculum Counsellors, in working with individual students, know their personal problems and aspirations, their talents and abilities, as well as the social pressures confronting them. Counsellors, therefore, can provide data that serve as a basis for curriculum development, and they can help curriculum developers shape courses of study that more accurately reflect the needs of students. Too often, counsellors are not included in curriculum development efforts.

Key Facts About the Battle of Gonzales

Key Facts About the Battle of Gonzales On October 2, 1835, rebellious Texans and Mexican soldiers clashed in the small town of Gonzales. This small skirmish would have much larger consequences, as it is considered to be the first battle of Texas War of Independence from Mexico. For this reason, the fight at Gonzales is sometimes called the Lexington of Texas, referring to the place which saw the first fighting of the American Revolutionary War. The battle resulted in one dead Mexican soldier but no other casualties. Prelude to Battle By late 1835 tensions between Anglo Texans - called Texians - and Mexican officials in Texas. The Texians were becoming more and more rebellious, defying rules, smuggling goods into and out of the region and generally disrespecting Mexican authority every chance they could. Thus, Mexican President Antonio Lopez de Santa Anna had given the order that the Texians be disarmed. Santa Annas brother-in-law, General Martà ­n Perfecto de Cos, was in Texas seeing that the order was carried out. The Cannon of Gonzales Some years previously, the people of the small town of Gonzales had requested a cannon for use in defense against Indian raids, and one had been provided for them. In September 1835, following orders from Cos, Colonel Domingo Ugartechea sent a handful of soldiers to Gonzales to retrieve the cannon. Tensions were high in the town, as a Mexican soldier had recently beaten up a citizen of Gonzales. The people of Gonzales angrily refused to return the cannon and even arrested the soldiers sent to retrieve it. Mexican Reinforcements Ugartechea then sent a force of some 100 dragoons (light cavalry) under the command of Lieutenant Francisco de Castaà ±eda to retrieve the cannon. A small Texian militia met them at the river near Gonzales and told them that the mayor (with whom Castaà ±eda wished to speak) was unavailable. The Mexicans were not allowed to pass into Gonzales. Castaà ±eda decided to wait and set up camp. A couple of days later, when told that armed Texian volunteers were flooding into Gonzales, Castaà ±eda moved his camp and continued to wait. The Battle of Gonzales The Texians were spoiling for a fight. By the end of September, there were some 140 armed rebels ready for action in Gonzales. They elected John Moore to lead them, awarding him the rank of Colonel. The Texians crossed the river and attacked the Mexican camp on the misty morning of October 2, 1835. The Texians even used the cannon in question during their attack, and flew a makeshift flag reading â€Å"Come and Take it.† Castaà ±eda hastily called for a cease-fire and asked Moore why they had attacked him. Moore replied that they were fighting for the cannon and the Mexican constitution of 1824, which had guaranteed rights for Texas but had since been replaced. The Aftermath of the Battle of Gonzales Castaà ±eda did not want a fight: he was under orders to avoid one if possible and may have sympathized with the Texans in terms of states rights. He retreated to San Antonio, having lost one man killed in action. The Texan rebels did not lose anyone, the worst injury being a broken nose suffered when a man fell off a horse. It was a short, insignificant battle, but it soon bloomed into something much more important. The blood spilled that October morning marked a point of no return for the rebellious Texians. Their victory in Gonzales meant that disgruntled frontiersmen and settlers all over Texas formed into active militias and took up arms against Mexico. Within a couple of weeks, all of Texas was up in arms and Stephen F. Austin had been named commander of all Texan forces. For the Mexicans, it was an insult to their national honor, a brazen challenge by rebellious citizens which needed to be put down immediately and decisively. As for the cannon, its fate is uncertain. Some say it was buried along a road not long after the battle. A cannon discovered in 1936 may be it and it is currently on display in Gonzales. It also may have gone to the Alamo, where it would have seen action in the legendary battle there: the Mexicans melted down some of the cannons they captured after the battle. The Battle of Gonzales is considered the first true battle of the Texas Revolution, which would continue through the legendary Battle of the Alamo and not be decided until the Battle of San Jacinto. Today, the battle is celebrated in the town of Gonzales, where there is an annual re-enactment and there are historical markers to show the various important locations of the battle. Sources Brands, H.W. Lone Star Nation: The Epic Story of the Battle for Texas Brands, H.W. Lone Star Nation: The Epic Story of the Battle for Texas Independence. Paperback, Reprint edition, Anchor, February 8, 2005. Henderson, Timothy J. A Glorious Defeat: Mexico and its War with the United States. 1st Edition, Hill and Wang, May 13, 2008.

Waiting with Bated Breath

Waiting with Bated Breath Waiting with Bated Breath Waiting with Bated Breath By Maeve Maddox I laughed when I read the following in a film review: Richard M. Nixon granted British playboy presenter turned journalist David Frost a series of twelve television interviews. This was the first time Nixon had spoken since his resignation in the midst of the Watergate scandal and Americans waited with baited breath, longing for the trial they’d been denied by newly president Gerald Ford’s blanket pardon. What, I wondered, did those Americans use for bait on their breath? I’m no longer laughing. Apparently a lot of people don’t know that the word is spelled bated in the expression bated breath. Journalists tend to spell it correctly: China’s three astronauts are preparing for the nations first ever space walk as the country waited with bated breath to see if the manoeuvre, deemed highly risky, would be successful. With global automotive CEOs and leaders like Mr Carlos Ghosn saying that his company too would like to explore the possibility of manufacturing a similar car, the world’s media too has been waiting with bated breath for the Tata ultra-low cost car. Shoppers waited with bated breath in November to see what the future of Santas beady, winking eye was after he received a makeover. Many bloggers, on the other hand, tend to go with â€Å"baited† We waited with baited breath, turned our lonely eyes 2 U It was now Rome who waited with baited breath for the day when an army would sweep down.. â€Å"I was waiting with baited breath until I could order my prints. I was then waiting with baited breath until the order was confirmed. I then waited with baited breath until they arrived here in Melbourne, Australia. Now I am waiting with baited breath until they are back from the framing shop and I can hang all three in my house and gaze at them adoringly each time I pass them. The expression bated breath is another that we owe to Shakespeare: Shall I bend low and in a bondmans key, With bated breath and whispering humbleness, Say this; Fair sir, you spit on me on Wednesday last; You spurnd me such a day; another time You calld me dog; and for these courtesies Ill lend you thus much moneys? Shylock is speaking, with heavy sarcasm, to Antonio in the Merchant of Venice (I,iii). A bondman is a slave or an indentured servant who could be expected to speak in a quiet voice to his masters and betters. The bated in the expression is from a shortening of the verb abate and, in the form bate, means â€Å"to reduce, to lessen in intensity.† The expression under discussion is the only survival of the word in modern English. The person who â€Å"speaks with bated breath† is not using full lung power. The person who â€Å"waits with bated breath† is holding his breath, or barely breathing. Abate comes from Old French abattre, â€Å"to beat down, cast down. from a Latin origin meaning â€Å"to beat.† The word abattoir, a place where cattle are slaughtered, derives from the same source. In modern usage, abate is used most frequently in a legal context. For example, â€Å"noise abatement laws† seek to control sources of excessive noise. The noun bait, food put on a hook or trap to lure prey,† is from an Old Norse word. As a verb it means â€Å"to put food on a hook or in a trap.† And yes, there is one context in which â€Å"baited breath† would be correct: Cruel Clever Cat Sally, having swallowed cheese, Directs down holes the scented breeze, Enticing thus with baited breath Nice mice to an untimely death. Geoffrey Taylor, Argosy 1940 Otherwise, it’s bated breath. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Expressions category, check our popular posts, or choose a related post below:Possessive of Proper Names Ending in SYay, Hooray, Woo-hoo and Other Acclamations20 Classic Novels You Can Read in One Sitting

Office furniture ksf Research Paper Example | Topics and Well Written Essays - 500 words

Office furniture ksf - Research Paper Example One of the concepts that can enhance flexibility in the production of office furniture is the adaptation of the flexibility manufacturing systems that further enhance flexibility. However, such systems require high capital investments to install as well as operate such systems therefore; most of the small as well as medium companies may not be able to install such systems (Dima, 2013). Some of the benefits of the Flexible production processes include maximization of production and hence more profits. Keeping in mind flexible production processes such as the utilization of the FMS enhance the quality of the goods been manufactured. Consequently, such systems reduce the labor cost since fewer workers will be required to run the systems. This is because the production process in such cases involves the use of machines rather than the use of the conventional methods that necessitate more workers. Moreover, such systems increase the speed of production. New Product development is very important in the manufacturing of office furniture. This is due to the high competition in the market. This process may entail the innovation of new products or the development of the existing products. New products are very essential for survival especially in a competitive market. However, the innovation of new product must be followed by marketing strategies that push the products into the market (Dima, 2013). Moreover, furniture manufacturers need are forced to innovate new products due to the change in consumer wants, therefore increasing completion as well advances in technology. Moreover, a furniture manufacturer can engage in the production of new product in order to capitalize on new opportunities. For the manufacturer to capitalize on new opportunities they must understand thoroughly the customer wants; as well as develop new products that

Strategic Planning Research Paper Example | Topics and Well Written Essays - 9500 words

Strategic Planning - Research Paper Example The main branch of Delta the (Headquarter) is in Texas, United State America. This report is focusing on conducting a strategic plan for Delta Corporation Qatar (Subsidiary). The importance of this report is to sustain long-term success for the corporation. Carefully planning helps the managers to go to the right place and achieve their goals in effective and efficient ways. This report is divided into different parts. The first section is about Delta Corporation history and brief background, the core activities performed by Delta Company. The second part is about the methodology of collecting relevant data about Delta. After collecting data about the company, we will discuss the SWOT analysis â€Å"Strengths, Weaknesses, Opportunities, and Threats† to evaluate the company situation. The analysis includes the internal and external factors. Internal factors are such as the vision, mission, financial ratios, IFE tool (internal factors evaluation matrix) to know the strengths and the weakness of the company. Furthermore, in this section, we will discuss the strategic map and the EFE (external factors evaluation matrix). For the external assessment, we will evaluate the opportunities and threats. External factors are such as porter’s five forces model. After that, we will formulate SMART objectives and the tactics need to accomplish these objec tives. Furthermore, we will discuss the implementation plan. The last part of this report is to conclude all the information that we discuss and give some recommendations to Delta Corporation.

Resume Essay Example | Topics and Well Written Essays - 250 words - 10

Resume - Essay Example I have very good recommendations from my professors. I currently have a GPA of 3.0. During the course of my work, I am interested in doing a Master’s in Human Resources in California. This greater work experience and knowledge will enable me to accomplish greater goals and promote perfection for the Kingdom of Saudi Arabia. My skills include my abilities to speak more than one language, English and Arabic. I am a native citizen of Saudi Arabia from Dammam. My family name is Al-Dosssary. I am skillful in managing people in the department. Based on my prior experience working at British Airways in Saudi Arabia, I have solved numerous issues with people. For example, I have managed passengers who have overload weight of baggage. My solution to them was to assist them with strategies of how to decrease the weight by putting some of the weight in their handbag. With this solution, the passenger was able to fly safely without paying extra and I was able to not go above or beyond the company policy limit of bags lower than 23 kilos. I thank you for your attention in reading my letter and I am open to having further continuing relationship. Enclosed, is a copy of my resume. I thank you for your attention. You can call me during normal Business Hours from Monday-Friday at my cell-phone (720) 421-8371 or at

Helicopter Operations and Night Capability

Helicopter Operations and Night Capability IN INDIAN CONTEXT The helicopter is probably the most versatile instrument ever invented by man. It approaches closer than any other to fulfilment of mankinds ancient dreams of the flying horse and the magic carpet. Igor Ivanovitch Sikorsky CHAPTER I INTRODUCTION Background 1. After having flown the fixed wing aircraft successfully in 1903, man turned his attention towards the more complex and challenging problems of flying a rotary wing. The visionaries had long since prophesied the possibility of a vehicle that would takeoff vertically before moving forwards. The recorded evidence of this idea was found in the Chinese books as early as 400 BC, but it was probably only around 1490, when Leonardo da Vinci came up with his sketches of a similar vehicle, that the concept of helicopters actually advanced. Despite this, the first free flight was performed only in November 1907. Unlike the airplane, a helicopter is an aircraft with rotary wings. The capability to hover for long durations allows the helicopter to accomplish tasks unachievable by other means. In addition, the versatility and ease of operation, compared to a fixed wing aircraft make helicopters an excellent choice for all kinds of operations, by day and especially by night. Evolution of Helicopter 2. The earliest mentions of a vertical flight have been in a Chinese book written in 4th century BC, referred to as Pao Phu Tau[1]. Someone asked the master about the principles of mounting to dangerous heights and travelling into the vast inane. The Master said, Some have made flying cars with wood from the inner part of the jujube tree, using ox-leather [straps] fastened to returning blades so as to set the machine in motion[2]. However, it was in 1490, when Leonardo da Vinci had the imagination to design a machine made of wood and starched linen, called the ‘helical screw. This machine, operated by a spring mechanism, was supposed to literally screw itself vertically into the air. This machine, shown in Fig. 1, was the origin of the word helicopter. The word is a combination of the Greek words, ‘Helix meaning spiral and ‘Pteron meaning wing[3]. Thereafter, in July 1754, Mikhail Lomonosov demonstrated a small coaxial rotor for lifting meteorological instruments. C hristian de Launoy, and his mechanic, Bienvenu, made a model with a pair of counter-rotating rotors, using turkeys flight feathers as rotor blades, in 1784. 3. Between the Fifteenth and Twentieth Centuries, adequate machinery needed to produce helicopters, like turbine engines and rotors, was not yet made possible by assembly lines, but as the Industrial Revolution prompted factories and technology accelerated, the helicopter evolved. One of the first breakthroughs in helicopter advancement was by George Cayley who produced a converti-plane in 1843. A man named Bourne flew the helicopter-like aircraft a year later. Spring-like contraptions inside, apparently powered this model. All helicopter models at this time lacked suitable power to achieve flight and were both bulky and heavy[4]. In 1877, Enrico Forlaninis unmanned helicopter, powered by a steam engine stayed at a height of 13 m for 20 secs after a vertical takeoff. However, Breguet-Richet‘s Gyroplane No. 1 achieved the first successful vertical flight, in September 1907. Since this machine did not have any control or steering devices of its own, this could not take the credit for the first helicopter to make a truly free flight. Paul Cornu claimed this recognition in November 1907, when he flew his ‘Flying Bicycle at a height of 0.3 m for 20 secs. 4. During the World War I in 1917, the engineers of Hungarian Ganz Company designed a radical motorized flying machine to replace the dangerous hydrogen-filled balloons, then being used to observe enemy positions. This aircraft flew to a height of over 50 m. 120 hp engines and two massive wooden propellers turning in opposite directions supported it. It was intended to lift a pilot, an observer, a machine gun and fuel for an hours flight. Because of great success and curious design, many specialists consider it as the worlds first real helicopter[5]. The quality and quantity of production materials increased, and great improvements were made in the field of engine technology in many parts of the world including Europe and the United States. An aircraft model for military advancement was needed for more versatile and precise war tactics. With better technology and more need, the next step in helicopter advancement would soon come. 5. Meanwhile, Juan de la Cierva was developing the first practical rotorcraft in Spain. In 1923, the aircraft that would become the basis for the modern helicopter rotor began to take shape in the form of an autogyro. Cierva had discovered aerodynamic and structural deficiencies in his early designs that could cause his autogyros to flip over after takeoff. The flapping hinges that Cierva designed for the C.4 allowed the rotor to develop lift equally on the left and right halves of the rotor disk. A crash in 1927, led to the development of a drag hinge to relieve further stress on the rotor from its flapping motion. These two developments allowed for a stable rotor system, not only in a hover, but in forward flight. Albert Gillis von Baumhauer, a Dutch aeronautical engineer, began studying rotorcraft design in 1923. His first prototype flew (hopped and hovered in reality) on 24 September 1925, with Dutch Army-Air arm Captain Floris Albert van Heijst at the controls. The controls that Captain Heijst used were Von Baumhauers inventions, the cyclic and collective. Patents were granted to Baumhauer for his cyclic and collective controls by the British ministry of aviation on 31 January 1927. At the same time, Boris N. Yuriev and Alexei M. Cheremukhin constructed and flew a single rotor helicopter that had an open tubing framework and utilized two anti-torque rotors, one each at tail and nose. Another Russian, Nicolas Florine, built the first twin tandem rotor machine to perform a free flight, in 1933. The Brà ©guet-Dorand Gyroplane Laboratoire was built in 1933. After many ground tests and an accident, it first took flight on 26 June 1935. Within a short time, the aircraft was setting records with pilot Maurice Claisse at the controls. On 14 December 1935, he set a record for closed-circuit flight with a 500-meter (1,600 ft) diameter. The next year, on 26 September 1936, Claisse set a height record of 158 meters (520 ft). And, finally, on 24 November 1936, he set a flight duration record of one hour, two minutes and 5 seconds over a 44 kilometre (27 mi) closed circuit at 44.7 kilometres per hour (27.8 mph). The aircraft was destroyed in 1943 by an Allied airstrike at Villacoublay airport. Despite the success of the Gyroplane Laboratoire, the German Focke-Wulf Fw 61, first flown in 1936, would eclipse its accomplishments. The Fw 61 broke all of the helicopter world records in 1937, demonstrating a flight envelope that had only previously been achieved by the autogyro. Nazi Germany would use helicopters in small numbers during World War II for observation, transport, and medical evacuation. The Flettner Fl 282 Kolibri synchropter was used in the Mediterranean Sea, while the Focke Achgelis Fa 223 Drache was used in Europe. Extensive bombing by the Allied forces prevented Germany from producing any helicopters in large quantities during the war. 6. In the United States, Igor Sikorsky built the VS-300, a single rotor design with a smaller rotor mounted vertically on the tail boom to counter the torque produced by the main rotor. Developed from this design, the R-4 became the first mass produced helicopter. This was also the only allied helicopter to see service in the World War II. Sikorsky produced over 400 helicopters of R-4, R-5 and R-6 types before the end of the war. Meanwhile, Bell Aircraft built the Model 30, which later developed into Bell 47, which became the first certified helicopter for civilian use and remained the most popular model for nearly three decades. 7. In 1951, Charles Kaman modified his K-225 helicopter with the turbo-shaft engine. This was a major development in terms of reducing weight penalty. On 11 December 1951, this became the first turbine powered helicopter, followed by Navy HTK-1 to be the first twin-turbine helicopter, in 1954. However, Alouette II was the first helicopter produced with a turbine engine[6]. More development were seen during the 1960s and 70s due to the Vietnam War. These advancements were fuelled by the militarys requirement for advanced helicopters for use as gunships, missile-launching platforms and for the rescue of the wounded troops. The Bell 209 Cobra was one of the helicopters produced at that time. Thereafter, with further advancement in technology, came the era of ‘Tiltrotors. McDonnell produced their Tiltrotor UAV and Bell/Boeing produced the model 609, the worlds first commercial Tiltrotor[7]. Helicopters have continued to develop with the advancing technology and concepts like Ã¢â‚¬Ë œNOTAR, contra-rotating rotors, etc., have come into being. The helicopters have also found employment in nearly all walks of life and will continue to develop and find more areas of usability in the future. Nevertheless, for India the helicopter age started in the mid 1950s when a couple of Sikorsky helicopters flew in the Indian skies for the first time. The initial build-up was slow. The war with China in 1962 gave the necessary impetus to the chopper fleet in the armed forces. Since then there is no looking back[8]. CHAPTER II METHODOLOGY ‘When once you have tasted flight, you will forever walk the earth with your eyes turned skywards, for there you have been, and there you will always long to return†. Leonardo da Vinci Statement of the Problem 1. To identify and study the roles and challenges for night operations by helicopters and to suggest measures to overcome these, in Indian context. Hypothesis 2. Helicopters are going to be employed in greater numbers all over the world and India is no exception. Night helicopter operations will become a necessity due to the utilization of these machines in greater numbers as well as the future trends. Thus, India needs to improve the infrastructure and the support services to optimally utilise these flying machines by ensuring their unhindered operations by night. Justification for the Study 3. The year 2008 had been declared as the year of the Helicopter, in India. The incredibly complex flying machine has come a long way and is now whirring at Indias doorstep like never before, both in the civil and military sectors. That is why the third International Seminar Heli Power India 2008 turned into a resounding success after Heli Power India 2006[9]. In addition, in August 2009, U.S. Trade and Development Agency (USTDA) awarded a grant to the Directorate General of Civil Aviation (DGCA), in India, to help update regulations and practices governing helicopter operations. The USTDA grant, to be carried out under the auspices of the U.S.-India Aviation Cooperation Program (ACP), will aid in the growth and development of Indias civil aviation sector by fostering increases in the volume of helicopter operations in the expanding Indian market[10]. Even though the growth of civil helicopter industry has stalled a bit in the world scenario, there is optimism in its growth in India. In a presentation at HELI-EXPO 2006, Air Vice Marshal Sridharan said, â€Å"India is truly a helicopter country on account of its diverse topography†[11]. This was because of the interlacing rivers and numerous hill ranges that impede the development of rail/road network. Helicopters are routinely employed by civil administration to support Government operations to connect to population centres in most of north India. Also since India is prone to natural disasters, wherein helicopters are utilised in a big way for relief operations, the need for, and thus the numbers of helicopters in operations is going to steadily increase. 4. The helicopter strength has not increased greatly in the defence services, though there are plans to upgrade the existing fleet as well as procure new helicopters in the near future. This will be mandatory keeping the internal security scenario in mind post 26/11 incident at Mumbai. Along with the increase in the number of helicopters, the changing scenario is laying more emphasis on night operations, throughout the world. Therefore, it is necessary to evaluate our capabilities to be able to undertake unhindered helicopter operations by night. Scope 5. This study concentrates on bringing out the present and future roles envisaged for helicopter night operations, both civil and military, in Indian context. The paper is also intended to analyse the challenges to these operations, not considering the financial implications, and make some recommendations to enhance helicopter operations in India. Method of Data Collection 6. The data/information for preparing this dissertation has been collected through books, periodicals, aviation magazines, journals and articles available at the Defence Services Staff College Library, Wellington. Handouts issued by the College and various papers presented on helicopters have been referred to. Due to the paucity of literature in the library, articles, publications, papers by professionals available on internet have been extensively used. Many aspects have been discussed with officers from the helicopter stream of all three services. Bibliography of the various sources has been appended to this paper. Organisation of the Dissertation 7. The paper has been organised into chapters. It is proposed to study the subject in the following manner:- (a) Chapter I. Introduction (b) Chapter II. Methodology (c) Chapter III. Characteristics of a Helicopter (d) Chapter IV. Helicopter Operations in India (e) Chapter V. Helicopter Night Operations: Civil (f) Chapter VI. Helicopter Night Operations: Military (g) Chapter VII. Requirements for Night Operations (h) Chapter VIII. Challenges in Night Operations (i) Chapter IX. Recommendations (j) Chapter X. Conclusion CHAPTER III CHARACTERISTICS OF A HELICOPTER â€Å"Helicopters are really a bunch of parts flying in relatively close formation; all rotating around a different axis. Things work well until one of the parts breaks formation†. Anonymous 1. Unlike an airplane which uses the engine thrust for forward propulsion and the fixed aerofoil sections (wings) for the lift, a helicopter uses a set of rotating aerofoil sections (rotors) for both the lift as well as the directional motion. The engine power is primarily used for rotating the main rotor. It also has an anti-torque system in the form of a vertical tail rotor/contra-rotating coaxial main rotor or in some types; called the ‘NOTAR, the jet efflux from the main engine is used for this purpose. This method of lift generations bestows the helicopter with the ability:- (a) To takeoff and land vertically (b) To hover over any given point (c) To move in any direction, i.e. forward, backward and sideways (d) Turn through 360 ° over a given point. 2. At times the helicopter require a short air strip to be able to carry out Short Takeoff and Landing (STOL) instead of the Vertical Takeoff and Landing (VTOL) due to the power requirement for VTOL not being available. This would depend on the:- (a) All Up Weight (AUW). More the AUW more will be the power required for VTOL. (b) Winds. Like conventional aircraft, helicopters takeoff/land most efficiently, when pointed into wind. Stronger the head winds the more efficiently the machine behaves. (c) Density Altitude (DA). This is a function of the prevailing temperature and the density at the operating altitude and this determines the performance of the helicopter. Lower the DA better is the performance and load carrying capacity of a helicopter. Types of Helicopters 3. The helicopters are classified into various types based on their Maximum Takeoff Weight (MTOW), their role and their design[12]. Based on the MTOW they are classified as:- (a) Type-I (Heavy) Skycrane S-61, Chinook, Mi-26 (b) Type-II (Medium) Bell 205 (c) Type-III (Light) Jetranger / Md-500 4. Based on the role they are classified as:- (a) Utility helicopter Mi-8, Mi-17, UH-1 Huey (b) Armed helicopter/Gunship A utility helicopter with limited firepower (c) Attack helicopter Mi-25/35, AH-64 Apache (d) Airborne Early Warning (AEW) helicopter Kamov Ka-32 (e) Anti-Submarine Warfare (ASW) helicopter Seaking (f) Multi-mission and Rescue helicopters Chetak, Cheetal (g) Observation helicopters OH-58 Kiowa, Gazelle (h) Training helicopters Robinson R22, Cheetah (j) Skycrane helicopters Sikorsky S-64 (k) Helitack helicopters Bell 205 (l) MEDEVAC helicopters Sikorsky S76-C+ (m) Unmanned helicopters Sikorsky Cypher II, Bombardier CL-327 Guardian 5. Based on their construction, they are classified as:- (a) Conventional (Single rotor and tail rotor combination) Alouette III, HAL Dhruv (b) NOTAR (No Tail Rotor) MD Helicopters 520N, Aerotà ©cnica AC-14 (c) Tandem rotor CH-47 Chinook, Boeing Vertol 107-II (d) Fenestron Eurocopter EC120B, Aà ©rospatiale Gazelle (e) Tip jet rotor McDonnell XV-1, Hughes XH-17 (f) Coaxial rotors Kamov-32, Sikorsky S-69 (g) Synchropter Flettner Fl 282 Kolibri, HH-43 Huskie (h) Compound helicopter/Gyrodyne McDonnell XV-1, Kamov Ka-22 (j) Tilt rotor Bell/Boeing V-22 Osprey, Bell/Agusta BA 609 (k) X-wing Sikorsky S-72 (only experimental) Advantages over Fixed Wing 6. The major advantages of a helicopter over a conventional fixed wing aircraft are as follows:- (a) Ubiquity. The ability of a helicopter to operate from any/every place, without the requirement of a prepared surface, is its biggest advantage. This is also the major factor which favours extensive night operations by a helicopter, as it does not require elaborate infrastructure for night operations. (b) Flexibility. The helicopter is very flexible in terms of task performance. It can be converted from one role to another with minimal time, resources and effort. This characteristic aids in ease of operations by night wherein there would be constraints in terms of lighted space, etc. (c) Vertical Envelopment. Helicopters can achieve and maintain vertical envelopment without the need for a linkup. (d) Versatility. The helicopters ability to fly at all speed regimes (i.e. 0 to maximum) and at very low heights, permits the use of terrain masking to improve its survivability and thus its utilization in combat scenario. This property also propels the use of helicopter in various civilian applications like survey, meteorological observation, etc. (e) Logistic Support. Due to the above-mentioned attributes, the helicopter is the ideal platform for speedy logistic support in confined/inaccessible areas both for military as well as civilian needs. (f) Under Slung Load. Helicopters also have the advantage of carrying the cargo/payload either inside their fuselage or, if the size/shape of the cargo/payload so demands then, outside as an under slung load, with minimal penalty. (g) Weather. Helicopters can be flown in weather conditions like poor visibility and precipitation which would not permit flight of an airplane, owing to their versatility. Availability of better onboard avionics has improved its all weather capability manifolds. (h) Night Operations. Owing to its ubiquity, versatility and the capability to operate in marginal weather conditions, helicopters make an ideal choice for night operations. Limitations 7. Helicopters do have certain disadvantages as well, in comparison to a fixed wing aircraft. Some of these are:- (a) Limited Speed. Due to the characteristics of rotating rotor blades (tip speeds approaching 1 Mach) helicopters cannot travel faster than about 350 kmph[13]. These speeds are very low and unsafe in a combat area. (b) Fuel Consumption. Helicopter consumes more fuel than a conventional aircraft in performing the same task. (c) Limited Range. Helicopters being smaller, carry lesser fuel. This coupled with the higher fuel consumption have a severe limitation on the range of operations of helicopters. (d) Payload. Helicopters have to strike a balance between the size and weight of the intended payload viz. their own design and manoeuvrability. The bigger the intended payload the bigger the helicopter and lesser is the manoeuvrability (applicable for both internal and under slung loads). Also, the payload capacity of the helicopter reduces more rapidly with increase in altitude, compared to an airplane. (e) Maintenance. Maintenance is difficult due to large number of moving part[14]. (f) High Cost. Rotorcraft being complex cost many times more than conventional airplane of similar performance, both in procurement as well as in operations. (g) Noise Vibrations. Helicopters are inherently noisy and prone to vibrations due to the rotor dynamics. This is problem area for both civil as well as military employment of these machines. (h) Limited Service Ceiling. In general, helicopters have a much lower service ceiling compared to an airplane. Additionally, most of the helicopters have an unpressurised cabin/passenger area, thereby forcing them to operate at much lower altitudes, due oxygen considerations. (i) Vulnerability. Noise, low speed and limitations due load are the major contributors to military helicopters being vulnerable to enemy fire. Thus, the armour requirement for the helicopter depends on these factors. CHAPTER IV HELICOPTER OPERATIONS IN INDIA â€Å"Any Air Force that welcomes the onset of darknessis well on its way to victory† Mark Hewish Civil Helicopters 1. Though the history of helicopter dates back to 400 BC, for India the helicopter age started in the mid 1950s when a couple of Sikorsky helicopters flew in the Indian skies for the first time[15]. These helicopters were for the Indian Air Force. The first commercial helicopter flight was undertaken by Capt. R Captain in a Hiller UH 12B in Nov 53. Helicopters in both civil military have been in service of the nation for over 59 years. From 1953 to 1986, the commercial use of helicopters in India was limited to small Aviation companies who were involved in communication and crop spraying roles. The formation of Helicopter Corporation of India by the Govt in 1986 (later named Pawan Hans Helicopters Limited) with a fleet of 42 helicopters provided the first boost to the Industry in the country. The growth rate has registered double digit only since 2004. Since then, until 2007, the growth of civil registered helicopters has been very modest, as shown in Fig 2[16]. 2. Against a global average of one helicopter per half million people, in India the ratio is one helicopter for five million. The Rotary Wing Society of India (RWSI), the only society of its kind came into existence in 1998 and that too due single handed efforts of Air Vice Marshal (Retd) K Sridharan. Despite the late start, the prospects for growth in civil helicopter fleet are bright. The rapidly growing economy with activities spreading to remote, inaccessible areas, increased dependence on air travel and the ever widening search for energy reserves could propel growth in the next few years[17]. Realising the potential shown by civilian helicopter operations across the country, the civil aviation ministry is reportedly setting up a ‘Helicopter Mission to coordinate helicopter operations and deliberate on relevant issues[18]. Military Helicopters 3. The build up of military helicopters was slow and the impetus to the fleet actually came only after the 1962 war with China, although some helicopters did see action in that war itself, primarily in the casualty evacuation role. The earliest helicopter pilots in India were former Fighter and Transport pilots who for medical reasons or ‘service exigencies were moved to helicopter units. They were joined by some pilots of the Auxiliary Air Force. The first ‘true blood chopper pilots were commissioned with the 83rd Pilots Course in 1963. As no helicopter training facility existed in India, those flight cadets who were selected to fly choppers were sent to the UK or USSR for their initial conversion before returning home to join Mi-4 or Chetak units. Subsequently a Logistic Support Training Unit was set up in Allahabad for training helicopter pilots, and this was later converted to the Helicopter Training School, which is currently located at Fighter Training Wing in Hyder abad[19]. From this modest beginning the IAF has grown in strength and capability to now participate in international exercises as well as in UN peace keeping missions all over the world. Helicopter Industry 4. Hindustan Aeronautics Limited (HAL) came into existence on 01 October 1964. The Company was formed by the merger of Hindustan Aircraft Limited with Aeronautics India Limited and Aircraft Manufacturing Depot, Kanpur. The Company traces its roots to the pioneering efforts of an industrialist with extraordinary vision, the late Seth Walchand Hirachand, who set up Hindustan Aircraft Limited at Bangalore in association with the erstwhile princely State of Mysore in December 1940. The Government of India became a shareholder in March 1941 and took over the Management in 1942. HALS involvement with rotary-winged aircraft dates back to June 1962 when, to meet the Indian Air Forces requirement for light helicopters, the Government of India signed a licence agreement with M/s SUD-AVIATION (Presently M/s EUROCOPTER, France)[20]. 5. The first helicopter type to be built at HAL Bangalore was the Alouette Ill, later named Chetak, with firm orders having been placed in January 1965, the raw material production phase beginning in 1969-70. The Alouette II, with the dynamics including power plant of the Alouette Ill was specifically developed to meet the Indian Armys stringent requirement and was christened Lama by the French (and Cheetah by the Indians). First Cheetah manufactured from raw materials was delivered in 1976-77[21]. 6. Over the next twenty years, HALs Helicopter Division produced hundreds of Chetak and Cheetah helicopters for the Indian Air Force, Navy, Army and Coast Guard as also for a number of civilian customers, including State Governments while a score or more were exported. This division has also produced the Dhruv helicopter (Advanced Light Helicopter-ALH) and its variants for the three services as well as for certain friendly foreign nations. It is currently pursuing the series production of the same and also developing the Indian Light Combat Helicopter (LCH)[22]. 7. Indias attraction for helicopter makers is reaffirmed by strategic deals struck in the past year by key rotorcraft players. Sikorsky Aircraft has signed a Memorandum of Understanding (MoU) with a unit of Tata Group on the production of cabins for the S-92 helicopter and Eurocopter has expanded its manufacturing capability in India in collaboration with Mach Aero[23]. CHAPTER V HELICOPTER NIGHT OPERATIONS: CIVIL Any idiot can get an airplane off the ground, but an aviator earns his keep by bringing it back anytime, anywhere, under any circumstances that man and God can dream up. Walter Cunningham 1. Helicopter is a unique and very versatile machine and can be deployed in variety of roles by modifying them even at a very short notice. The various civil operations that can be undertaken by helicopters in the night are discussed in the following paragraphs. The many other roles undertaken by helicopters like, the use of Sky crane, maintenance and repair of overhead high tension cables, etc. are not discussed here as these operations are likely to be undertaken in day only. 2. Helicopter Emergency Medical Service (HEMS). Helicopters are used as air ambulances for emergency medical assistance in situations when an ambulance cannot easily or quickly reach the scene. Helicopters are also used when a patient needs to be transported between medical facilities and air transportation is the most practical method for the safety of the patient. Air ambulance helicopters are equipped to provide medical treatment to a patient while in flight. The use of helicopters as an air ambulance is often referred to as MEDEVAC, and the service is known as Helicopter Emergency Medical Service (HEMS)[24], [25]. 3. Disaster Management. Disaster relief and humanitarian operations have become an increasingly important part of missions undertaken by many air forces around the world. The very magnitude of natural disasters like the massive tsunami, earthquake in 2001 and the seasonal floods in country warrant concerted efforts by various agencies to cope with the widespread destruction caused. Inevitably the helicopter had yet again featured as the primary air asset in bringing relief to the victims in these areas, be it food supplies, medical evacuation or movement of rescue parties to the hard to reach stricken areas. Tactical transport helicopters were used in a variety of multi-tasked missions from various air force bases around the region. They provided a vital link in creating the bridge for movement of personnel and materials in areas with little or no accessibility. At times, these operations had to be delayed due to the inclement weather or the absence of night capability with the helic opter in use. These occurrences reiterate the need for the nations armed forces as well as civil agencies to maintain a modern and effective rotary winged element that is capable of responding to these situations, irrespective of day or night[26]. 4. Airborne Law Enforcement. Police departments and other law enforcement agencies, in other nations, use helicopters to pursue suspects. Since helicopters can achieve a unique aerial view, they are often used in conjunction with police on the ground to report on suspects locations and movements. They are often mounted with lighting and heat-sensing equipment for night pursuits[27]. The same is likely to be inducted into our Police and other security agencies, in the future. 5. Electronic News Gathering. Helicopters, due to their versatility ubiquity, have become a popular means of electronic news gathering. The helicopters come equipped with gyro stabilised zoom cameras mounted under the fuselage and all other associated electronic equipment onboard for a direct transmission on satellite television. They are also equipped with cameras and lights for night time operations. Though this is not yet proliferated to India, the time is not very far when well see couple of these helicopters operating overhead, on a 24 x 7 basis. 6. Aerial Survey. Government and industries require various surveys like damp surveys, heat loss surveys, insulation integrity, water ingress, electrical distribution inspections, aerial mapping GIS of cities, pipeline aerial surveys, landfill site surveys for detection of methane gas and leachate flows, animal censusing surveys, sub-surface heating pipe/wiring detection and mapping etc. For their planning and development processes. These can be easily carried out by suitable equipment mounted on a helicopter. The advantage being that since the helicopter travels at a much slower speed and at a lower height compared to an airplane; the sampling rate for each parameter would be that much higher

Only a Girl in Boys and Girls by Alice Munro Essay -- Boys and Girls A

Only a Girl in Boys and Girls Alice Munro's short story, "Boys and Girls," explores the different roles of men and women in society through a young girl's discovery of what it means to be a girl. A close examination of the elements of a short story as they are used in "Boys and Girls" helps us to understand the meaning of the story. The story is set in the 1940s, on a fox farm outside of Jubilee, a rural area only twenty miles away from the county jail. The farm is a place that reflects the ingenuity of the narrator's father. The pens for the foxes are arranged in neat rows, inside a high guard fence like a "medieval town". The pens each contain a kennel, a wooden ramp, and dishes attached to the wire fence. The fox farm is the father's domain, a place of hard work and creativity, in which the narrator feels at home. The house itself is the mother's domain, but it is a place that the narrator shuns, as she shuns many elements of the feminine world. The contrast between the girl's concept of the farm and of the house demonstrates the conflict she experiences between her chosen position as her father's helper and her position in society as a girl. The point of view of the story is first person. The narrator is a young girl in the process of growing up, who is, at the end of the story, only eleven years old. She is a naà ¯ve narrator, being so young, and is unreliable in her view of the people around her, especially her understanding of her mother's motives. By writing the story in this way, Munro gives us a look at women's role in society through the eyes of a girl who is just finding out the effect that society's expectations have on her. The narrator is the main character of the story. As the protagonist, she is a ... ... as a girl, her role in society is different from her father's and brother's. Although limitations are placed on her, she is free to follow her own heart. This, to her, is the meaning of being "only a girl." In conclusion, the elements of this short story work together very well to demonstrate the theme of the story. The narrator's conflict between filling a masculine role and accepting a feminine one, the contrast between her mother and her father, and the setting that is divided between the mother's domain and father's domain all build the effect of the theme well. This story gives a fresh look at the question of women's role in society through the eyes of a young girl. Work Consulted: Munro, Alice. "Boys and Girls." The Norton Introduction to Literature. Eds. Carl E. Bain, Jerome Beaty and J. Paul Hunter. 6th ed. New York: Norton, 1995. 465-75.